Configuring Cisco 800 series routers in bridge mode

This post describes how to configure a Cisco 800 series in bridge mode.
The example configuration in this post was made using a Cisco 877.

 !
interface vlan 1
 no ip address
 no ip route-cache
 bridge-group 1
!
interface atm0
 no shut
 no ip address
 no route-cache
 no atm ilmi-keepalive
 pvc 8/35
  encapsulation aal5snap
 !
 dsl operating-mode auto
 bridge-group 1
!
bridge 1 protocol ieee
!
end
%d bloggers like this: